MONOBLOC COMPRESSOR

MONOBLOC COMPRESSOR


HP Depth in Meter Depth in Feet Discharge (LPH)
1.0 HP, 1.5 HP and 2.0 HP 30 to 120 100 to 400 900 to 8200
  • Water can be drawn from deep borewells.
  • This pump is very successful in low yield borewells getting dried frequently. Dry running will not affect this pump set.
  • Only pipe lines are kept in the borewell. The compressor pump and motor can be installed at any required place away from the borewell.
  • The installation and maintenance is very simple. Only oil level is to be maintained properly. Please check the oil level in the pump periodically.
  • These compressor pumps can be operated with motor or kerosene engines also (with some small alteration in bed).
Model Type Motor kW HP No.of Cylinder Pressure Kg/cm 2 Com/mot RPM Air Pipe (mm) Water pipe (mm) Air jet Submergence Lifting Height         Depth in (Meters) Feet
Discharge in LPM

(30)
100

(45)
150

(60)
200

(90)
300

(120)
400

B1-1 M1 Mono 0.75 (1.0) Single 8 1000
1420
12 25 25% 75%
1500 1350 1150 1000 900
50% 50% 1800 1500 1300 1100 1000
75% 25% 4000 3000 2750 2500 2400
B1-1.5 M1.5 Mono 1.1 (1.5) Single 10 850
1420
12 25 25% 75% 1700 1550 1300 1100 1000
50% 50% 2100 1700 1450 1200 1100
75% 25% 4150 3100 2900 2600 2500
Discharge shown are approximate only. Based on site conditions and water column in the bore well, there may be variations.